The TM-SWIM was developed by ALGE-TIMING especially for aquatic sports. The demands for a device with an integrated USB-Interface was the main reason for the changeover from the SWC to the TM-SWIM. It combines the most powerful electronic with the rugged design of ALGE. The built-in amplifier and the built-in rechargeable battery make this device unique. The TM-SWIM is the most modern timing-device; the PC is connected by USB or RS232 is only the display and the keyboard of this device.Tilbage Information
The ALGE OPTIc2 is the next generation of the successful photofinish system OPTIc. The camera uses the latest CCD-line scanning sensor technology. This allows using the camera even at bad light conditions. High recording speed with up to 3000 lines per second and high resolution with up to 1360 pixel.Tilbage Katalog Manual Information
The Startmicrophone SM8 is used for all sports, where the start command is given by a start gun (e.g. athletic, triathlon, cycling, swimming, speed skating, short truck, relay for cross country).
The Startmicrophone SM8 is needed to trigger the timer from the shooting sound of a gun. The SM8 is mounted on the barrel of the start gun (see picture).
If you use together with the SM8 the Speech Amplifier SV4/SM, than you have also the possibility to communicate between starter and timing operator with the Headset Q34. The same wires are used for the speech connection and starting impulses (two core cable).
The Start Judge SJ is a system to control the start of short distance track races (up to 400 m). The system consists of a Start Judge Cart and a sensor fastened to eaach starting block. The Start Judge system has a built-in speaker system. This allows the starter to give commands to the athletes through the loudspeakers built into the Start Judge Sensors. Also the start command is emitted through this loudspeakers. Thus, the advantage for the athletes is that every athlete can hear the start tone at the same time without any delay.Tilbage Katalog Manual
All starting blocks and relay-take-off sensors produced by ALGE-TIMING are made from high quality plastic or stainless steel 1.4571 and have integrated sensors to measure the jump from the block. Thus during relay competitions it is possible to check if the swimmer does not jump before the hit. In combination with the new SWT2 you can also measure the jump-off duration..Tilbage Swimming Katalog
The FLASH is used as optical start device and manly used additional to an acoustic start device (e.g. start gun). It is most common in sports like athletics and swimming.
An absolute necessity is the FLASH for races with deaf sports persons or if the manual stop watch has to be started far away from the start sound. If you use e.g. the start sound the triggering of the stopwatch will be delayed due to the slow movement of the sound. Light is much faster you will have no delay.
The FLASH is triggered by an external impulse device (e.g. start gun or push button). If it receives within 5 seconds a second impulse it will make five additional flashes as sign for a false start.
The FLASH has 80 LED (Light Emitting Diode) built in a case. The LED are extra bright so they will be good visible at sun light. It has different sockets for the start impulse signal. The power supply can be through 4 internal AA-batteries or direct from the timing device with low power. This allows the use the FLASH next to a swimming pool.
The photocell PR1a is a masterpiece of precision and power in a small package.
The transmitter of the photocell sends a modulated infrared beam. The receiver checks the infrared beam and makes an impulse for each interruption.
To use the photocell universally it is possible to switch between 3 different functions: Reflection-Photocell, Photocell Transmitter and Photocell Receiver.
The Three-Fold-Photocell consists of photocells arranged on top of each other built into the same case. There are two different types of the Three-Fold-Photocell. One type called RLS3c gives only a impulse if all 3 built-in photocells are covered simultaneously. The other type RLS3c-s has two switchable functions. One function receives the impulse if all 3 photocells are covered, the other function makes an impulse if any photocell is covered.Tilbage Katalog Information
Very solid and reliable touchpad, built as sandwich construction. The complete front-side is covered with PVS lamellas which distributing the force of the swimmers to one of the 4 tape switches which are placed between these lamellas and the protecting full size stainless steel backside. A sensitivity adjustment is not necessary as the 4 tape switches giving an extremely constant sensitivity over the full area.Tilbage Information
Display Boards from ALGE-TIMING are operated at sports events all over the world. ALGE-TIMING can offer a wide range of display systems. Because of the quality and flexibility of the ALGE products we have also more and more customers in the industry, advertising, traffic information, as well as other custom designed solutions.Tilbage Se alle Display Boards
The „Wireless Timing Network WTN“ is a complete unique radio network system for timing. This system allows several different timing devices communicating with each other in a wireless network. Due to the internal communication, the system recognizes devices that disappear inside the network and can report it.Tilbage Katalog
The P5 is a quiet and fast Thermo-Paper-Printer (up to 5 lines per second). The construction makes a easy paper change possible. The transport axle is combined with the paper cover and guaranties, that the paper can be changed without arranging the paper complicated. The printer head does not move since it is arranged over the complete line. Because of this construction a blocking of the paper between the axle and the printer head is almost impossible.Tilbage Manual Information
The TIDO is a docking station for the TIMY (connection to D-Sub 25 pole plug). The TIDO has all connections as sockets available, that you have available through the D-Sub 25 pole plug. Additional the TIDO has a built in speech amplifier that allows you to connect the headset for a speech connection to the start.Tilbage Information
The Battery Backup device BB1 is uninterruptible power supply and battery in one device. As long as external power supply is used, the internal battery is charged. In case of a mains power failure, the battery takes over the power supply. The BB1 can also be used as a battery in areas without mains supply.
The integrated LEDs always indicate the active mode of operation, e.g. when the battery is completely charged, the orange charging LED goes out